Lexmark XM1140 Guide de l'utilisateur télécharger pdf (Page 94)

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

1 Connect one end of the telephone cable that came with your printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost

for activation of the second phone port.

3 Connect your analog telephone phone to the port of the printer.

Notes:

• To make sure that the telephone port on the cable modem is active, plug an analog telephone into the

telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.

• If you need two telephone ports for your devices, but do not want to pay additional cost, then do not plug the

printer into the second telephone port. You can use a phone splitter. Plug the phone splitter into the Phone Line

1 or Phone Port, and then plug the printer and telephone into the splitter.

• Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug

an analog telephone into the splitter and then listen for a dial tone.

Faxing 94

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 308 309

Pas de commentaire

Lexmark XM1140 Guide de l'utilisateur Page 94