Lexmark XM1140 Guide de l'utilisateur télécharger pdf (Page 93)

Scenario 3: VoIP telephone service

To connect:

1 Connect one end of the telephone cable that came with the printer to the port of the printer.

2 Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP adapter.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost

for activation of the second phone port.

3 Connect the telephone to the port of the printer.

Tips for this setup:

• To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the phone port, and

then listen for a dial tone. If you hear a dial tone, then the port is active.

• If you need two phone ports for your devices, but do not want to pay additional cost, then do not plug the printer

into the second phone port. You can use a phone splitter. Plug the phone splitter into the port labeled Phone Line

1 or Phone Port, and then plug the printer and telephone into the splitter.

Note: Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct

splitter, plug an analog telephone into the splitter and then listen for a dial tone.

Faxing 93

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 308 309

Pas de commentaire

Lexmark XM1140 Guide de l'utilisateur Page 93