Lexmark 5000 Series Manuel d'utilisateur Page 96

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 171
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 95
i Make sure the new port is selected on the Ports tab, and then click Apply.
The new port is listed with the printer name.
j Click OK.
Finding a printer/print server located on remote subnets
The printer software CD can automatically find the printers that are located on the same network as the computer.
If the printer and print server are located on another network (called a subnet), you must manually enter an IP address
during printer software installation.
Direct IP printing
1 Connect the printer to an external print server using a USB cable.
2 Connect the print server to the network using an Ethernet cable.
Note: You may be connecting your printer directly into a wall connection or through a router. For more
information, see the print server documentation.
3 Insert the printer software CD.
4 Click Install.
5 From the “Connect Your Printer” dialog, select the network option.
6 From the “Networking Setup” dialog, select Direct Network Attached.
7 Select the printer/print server combination from the Network Printers list.
Note: If more than one is listed, match the MAC address of the print server to the one in the list. For more
information, see “Finding your MAC address” on page 95.
Ping the printer
1 Do one of the following:
In Windows Vista, click All Programs Accessories Command Prompt.
In Windows XP, click Start Programs or All Programs Accessories Command Prompt.
2 Type ping followed by the IP address of the printer. For example,
ping 192.168.0.25
3 Press Enter.
4 If the printer responds, you will see several lines appear that start with “Reply from”.
Turn off and restart the printer, and then try resending your print job.
5 If the printer does not respond, you will see “Request timed out.”
a Check that the computer has a wireless IP address.
1 Do one of the following:
In Windows Vista, click All Programs Accessories Command Prompt.
In Windows XP, click Start Programs or All Programs Accessories Command
Prompt.
2 Type ipconfig.
3 Press Enter.
96
Vue de la page 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 170 171

Commentaires sur ces manuels

Pas de commentaire