Lexmark 302 Manuel d'utilisateur télécharger pdf (Page 233)

Print Quality and Ribbon Problems

Problem: Unreadable characters

1: The ribbon is dry or worn.

Solution: Check the ribbon and replace it if it is dry or worn.

2: The Automatic Forms Thickness Adjustment (AFTA) setting

needs to be changed.

Solution: See the procedure for adjusting the forms thickness

setting through the operator panel (based on your forms device)

in Chapter 1, “Setting Up the 4232 Printer Model 302.”

Problem: Missing dots or irregular characters

1: The Automatic Forms Thickness Adjustment (AFTA) setting

needs to be changed.

Solution: See the procedure for adjusting the forms thickness

setting through the operator panel (based on your forms device)

in Chapter 1, “Setting Up the 4232 Printer Model 302.”

2: The ribbon is worn.

Solution: Check the ribbon for wear; replace it if necessary.

3: The ribbon is twisted or folded.

Solution: Straighten the ribbon.

4: The forms device is not seated correctly.

Solution: Check the forms device installation. See Chapter 1,

“Setting Up the 4232 Printer Model 302.”

5: The print head or printer is failing.

Solution: Do the printer test. See Chapter 4, “Using the

Operator Print Tests.” If your print head is defective, call for

service.

Appendix B. Problems B-33

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 273 274

Pas de commentaire

Lexmark 302 Manuel d'utilisateur Page 233