Lexmark X736DE Guide de l'utilisateur télécharger pdf (Page 113)

Initial fax setup

Many countries and regions require outgoing faxes to contain the following information in a margin at the top or

bottom of each transmitted page, or on the first page of the transmission: station name (identification of the business,

other entity, or individual sending the message) and station number (telephone number of the sending fax machine,

business, other entity, or individual).

To enter your fax setup information, use the printer control panel, or use your browser to access the Embedded Web

Server and then enter the Settings menu.

Note: If you do not have a TCP/IP environment, then you must use the printer control panel to enter your fax setup

information.

Using the printer control panel for fax setup

When the printer is turned on for the first time or if the printer has been off for an extended time, a series of start-up

screens appear. If the printer has fax capabilities, then the following screens appear:

Station Name

Station Number

1 When Station Name appears, enter the name to be printed on all outgoing faxes.

2 After entering the Station Name, touch Submit.

3 When Station Number appears, enter the printer fax number.

4 After entering the Station Number, touch Submit.

Using the Embedded Web Server for fax setup

1 Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the address

in the TCP/IP section.

2 Click Settings.

3 Click Fax Settings.

Faxing

113

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 337 338

Pas de commentaire

Lexmark X736DE Guide de l'utilisateur Page 113