Lexmark C790 Manuel d'utilisateur Page 28
- Page / 234
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Installing a flash memory or firmware card
The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed,
but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall
outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and
unplug any cables going into the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1 Access the system board.
Note: This task requires a flathead screwdriver.
2 Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
3 Holding the card by its sides, align the plastic pins on the card with the holes on the system board.
2
1
1 Plastic pins
2 Metal pins
4 Push the card firmly into place.
Additional printer setup
28
- C790 Series 1
- Contents 2
- Safety information 6
- • Keep the printer: 9
- Printer configurations 10
- Learning about the printer 11
- Understanding the home screen 13
- Sample touch screen 14
- Other touch-screen buttons 15
- Features 16
- Customizing the home screen 17
- Forms and Favorites 18
- Eco-Settings 18
- Web Server 19
- Importing a configuration 20
- Additional printer setup 21
- Accessing the system board 23
- Installing a memory card 26
- 1 Access the system board 28
- 2 Unpack the card 28
- Removing a printer hard disk 38
- Order of installation 39
- Installing optional trays 39
- Supported finishing features 40
- Standard bin 41
- Finisher bin 41
- Attaching cables 42
- Verifying printer setup 43
- Printing a network setup page 44
- Setting up wireless printing 45
- Enter the printer information 49
- For Windows users 51
- For Macintosh users 51
- In Mac OS X version 10.5 52
- Solutions Port 53
- Setting up serial printing 54
- Saving paper and toner 56
- Saving energy 57
- Adjusting Sleep Mode 58
- Using Hibernate Mode 58
- Recycling 59
- Recycling Lexmark products 60
- Recycling Lexmark packaging 60
- • Units of Measure 61
- • Portrait Width 61
- • Portrait Height 61
- 1 Pull the tray out 62
- 5 Insert the tray 66
- Envelopes 68
- Transparencies 68
- Linking and unlinking trays 69
- Unlinking trays 70
- Linking exit bins 70
- Configuring a custom name 71
- Paper guidelines 72
- Unacceptable paper 73
- Selecting paper 73
- Storing paper 74
- Supported paper sizes 75
- Printing 78
- Printing from a flash drive 79
- Printing specialty documents 81
- Tips on using labels 82
- Tips on using card stock 83
- Printing information pages 84
- Canceling a print job 85
- Supplies menu 88
- Paper menu 89
- Paper Size/Type menu 90
- Configure MP menu 93
- Substitute Size menu 93
- Paper Texture menu 93
- Paper Weight menu 95
- Paper Loading menu 97
- Custom Types menu 98
- Custom Names menu 99
- Custom Bin Names menu 99
- Universal Setup menu 99
- Bin Setup menu 100
- Reports menu 101
- Network/Ports menu 102
- Network Reports menu 103
- Network Card menu 104
- TCP/IP menu 104
- IPv6 menu 105
- Wireless menu 106
- AppleTalk menu 107
- Standard USB menu 107
- Understanding printer menus 108
- Parallel [x] menu 109
- Serial [x] menu 111
- SMTP Setup menu 113
- Security menu 115
- Disk Wiping menu 116
- Security Audit Log menu 117
- Set Date and Time menu 118
- Settings menu 119
- Flash Drive menu 126
- Setup menu 129
- Job Accounting menu 130
- Finishing menu 132
- Quality menu 134
- Utilities menu 137
- XPS menu 137
- PDF menu 138
- PostScript menu 138
- PCL Emul menu 139
- HTML menu 142
- Help menu 143
- Statement of Volatility 145
- Erasing volatile memory 146
- Erasing non-volatile memory 146
- Using the Embedded Web Server 147
- Maintaining the printer 150
- Storing supplies 151
- Ordering supplies 152
- Ordering a waste toner bottle 153
- Ordering staple cartridges 153
- Replacing supplies 154
- 8 Close the front door 157
- Moving the printer 158
- Shipping the printer 159
- Administrative support 160
- Setting up e-mail alerts 161
- Viewing reports 161
- Clearing jams 163
- 200 paper jam 165
- 201 paper jam 165
- 202–203 paper jams 166
- 230 paper jam 167
- 231–239 paper jams 168
- 24x paper jam 168
- 250 paper jam 169
- 455 staple jam 171
- 4 Close the staple guard 173
- 7 Close the stapler door 173
- Troubleshooting 174
- 1 Empty the hole punch box 176
- Load [src] with [size] 178
- Load [src] with [type] [size] 178
- Load staples 179
- Paper changes needed 179
- Reattach bin [x] 180
- Reattach bin [x] – [y] 180
- 36 Printer service required 182
- 58 Input config error 186
- 58 Too many bins attached 186
- 58 Too many disks installed 186
- Solving printing problems 189
- AKE SURE COLLATE IS SET TO ON 192
- ONTACT CUSTOMER SUPPORT 193
- ESET THE PRINTER 193
- Solving paper feed problems 196
- HECK THE PAPER GUIDES 197
- HECK THE PAPER PATH 197
- URN ON JAM RECOVERY 197
- HECK THE GUIDES 198
- HECK THE PAPER SIZE SETTING 198
- Gray background on prints 199
- HECK THE PAPER TYPE SETTING 203
- EPLACE THE PRINT CARTRIDGE 204
- EPLACE THE FUSER 204
- HECK THE PAPER 204
- CHECK THE PAPER TYPE 205
- HECK THE TRANSPARENCIES 207
- FAQ about color printing 208
- Manual Color menu 209
- CHECK THE NETWORK CONNECTION 211
- Product information 212
- Edition notice 212
- Trademarks 213
- Modular component notice 214
- Licensing notices 214
- Noise emission levels 215
- Static sensitivity notice 215
- ENERGY STAR 215
- Product power consumption 216
- Sleep Mode 217
- Off mode 217
- Total energy usage 217
- Industry Canada (Canada) 218
- Limited warranty 221
- Limited warranty service 221
- Extent of limited warranty 222
- Limitation of liability 222
- Additional rights 223
- MICROSOFT CORPORATION NOTICES 226
- Numerics 227
Produits connexes et manuels pour Imprimantes laser/LED Lexmark C790
(112 pages)
(385 pages)© 2020, manymanuals.fr. Tous droits réservés | 3.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels